1
2	VXI Mainframes V192 5-slot, C-size, VXI Mainframe V193 6-slot, C-size, VXI Mainframe V195 13-slot, C-size, VXI Mainframe V196 13-slot, C-size, VXI Mainframe
3	V192 5-slot, C-size, VXI Mainframe Features Sturdy, reliable construction Designed for portability: Only 22 lbs. (10 kg.) Small footprint: Only 20”(50.8 cm) deep x 15” (38.1 cm) high x 7" (17.8 cm) wide Field-replaceable power supply and fan subassembly for low MTTR 500 W power supply with monitoring (90 to 250 VAC input range) Solid-state jumperless backplane All supply voltages available for powering the UUT as well as for external monitoring
4	V193 6-slot, C-size, VXI Mainframe Features Cost-effective design Sturdy, reliable construction 450 W power supply Power supply monitoring Solid-state jumperless backplane 115 V or 230 V nominal AC input, auto-selected Removable cover for access to modules during product development or instrument calibration
5	V195 13-slot, C-size, VXI Mainframe Features Operates from 103.5 to 126.5 V and 207 to 253 V ac, 50/60 Hz Sturdy, reliable construction 1000 W power supply Superior cooling High performance jumperless backplane Quick-disconnect power supply and fan unit design Unsurpassed user convenience
6	V196 13-slot, C-size, VXI Mainframe Features Operates from 90 V to 250 V ac, 47 to 440 Hz Modular construction 1000 W power supply Superior cooling High performance jumperless backplane Removable power supply for short mean time to repair
7	Interfaces, Controllers and DSPs FOXI Fiber-optic Interface V120 Slot-0 Controller V122 PCI Host Interface V150 Embedded 68040/60 Real-time Slot-0 Controller V151 Embedded PowerPC Real-time Slot-0 Controller V166 Digital Signal Processor
8	FOXI^TM Fiber-optic Interface Features (V120) Provides the VXIbus controller for the FOXI interface bus system Priced competitively with other VXI interface methods Uses fiber-optic highway transmission Eliminates bulky parallel cables Provides full VXI Slot-0 functionality Provides full throughput with a 2 km distance between fiber-optic nodes Provides up to 10 Mbyte/s highway throughput
9	FOXI^TM Fiber-optic Interface (continued) Features (V122) Provides the PCI host adapter for a FOXI interface Supports up to 126 V120 VXI controllers on a single fiber-optic highway
10	V150 Embedded 68040/60 Real-time Slot-0 Controller Features Single-width, C-size Slot-0 controller Powerful 68040 or 68060 embedded processor. The 68060 performs arithmetic operations at 90 MIPS VxWorks^TM operating environment for powerful real-time computing Ideal for high-performance data acquisition and control Include Ethernet, two 1 Mbit/sec serial ports, real-time clock, timers and counters Two PMC card options for fast/wide SCSI, IEEE 488, fast Ethernet, etc.
11	V151 Embedded PowerPC Real-time Slot-0 Controller Features Single-width, C-size Slot-0 controller High-performance PowerPC embedded processor with clock options from 120 to 350 MHz VxWorks^TM operating environment for powerful real-time computing Ideal for high-performance data acquisition and control •Includes Ethernet, RS-232 serial port, real-time clock, timers and counters Options available with 16, 32, 64 or 128 Mbyte DRAM Two PMC card options for fast/wide SCSI, IEEE 488, fast Ethernet, etc.
12	V166 Digital Signal Processor Features (Advance Information) Single-width, C-size DSP module Provides high-speed movement of data and signal processing Uses 60 MHz Texas Instruments TMS320C40 as its core processor Up to 512 kilobytes of SRAM Up to 64 megabytes of DRAM
13	Signal Conditioning and ADCs MUX-bus Signal Conditioning /ADC Family V207 500,000 Sample/second Host ADC V208 100,000 Sample/second Host ADC V241 96-channel High-level Scanning MUX V243 96-channel Low-level Signal Conditioner V246 8-channel Bridge Signal Conditioner V253 6-channel, Programmable Gain/Filter V213 32 or 64-channel Scanning ADC Up to 20 kSa/s aggregate; also DAC and TTL options V200 16 or 32-channel Sigma-Delta ADC Up to 200,000 samples/second per channel V205 32-channel 16-Bit ADC Up to 10 megasamples/second per channel
14	MUX-bus^TM ADC / Signal Conditioning
15	V207 500,000 Sample/second Host ADC Features 500 ksamples/s, aggregate sample rate 16-bit resolution and differential inputs Incorporates MUX-bus™ expandable to 256 channels and requires no intermodule cabling Fully programmable sampling and triggering with separate limit check on each channel Precision on-board reference for end-to-end calibration Optional 4 or 16 Mbyte memory
16	V208 100,000 Sample/second Host ADC Features 100 ksamples/s, aggregate sample rate; 200 ksample/s options available 16-bit resolution and differential inputs Incorporates MUX-bus™ expandable to 2048 channels and requires no intermodule cabling Fully programmable sampling and triggering with separate limit check on each channel Precision on-board reference for end-to-end calibration Optional 4 or 16 Mbyte multibuffer memory for transient mode and higher throughput in continuous mode
17	V241 96-channel High-level Scanning MUX Features Use with V207 or V208 host ADCs 24, 48, 72 and 96-channel input options Differential inputs on all channels Interface high level inputs (±10.24 V full scale) 2 programmable calibration channels (an internal precision voltage source as well as the source on the V207 or V208 host ADC)
18	V243 96-channel Low-level Signal Conditioner Features Use up to 11 V243s with the V208 host ADC 16, 32, 48, 64 or 96-channel input options Differential inputs and programmable gain per channel 2-pole, active Butterworth, low-pass filters with programmable cutoff: 10, 50, 500 Hz, or 5 kHz bypass Open-thermocouple detection option available End-to-end channel calibration Excellent high-frequency common-mode rejection when used with the V765-ZB11 or V792-ZB11 termination panels with trifilar transformers.
19	V246 8-channel Bridge Signal Conditioner Features Bridge completion for one, two, or four active arms; RTD options available Programmable shunt calibration and excitation; current monitoring, RTD options 6-pole, low-pass filters with programmable cutoff frequency: 20, 200, 1000, 2000 Hz or bypass Programmable bridge balance 10-wire transducer hookups Buffered outputs available for each channel Optional simultaneous sampling Optional trifilar-wound input transformers provide excellent high-frequency CMRR
20	V253 6-channel, Programmable Gain/Filter Features 16 differential channels Programmable gain on all channels Optional 6-pole, low-pass filter with program-selectable cutoff frequency: 20, 200, 1000, 2000 Hz; or 20 kHz bypass Optional simultaneous sampling Output available at front panel or MUX-bus™
21	V213 32 or 64-channel Scanning ADC Features 16-bit resolution 32 channels of analog input on the base card I/O expansion cards available for: • 32 RTD current sources, • 32 analog input channels • 32 analog output channels • 64 TTL I/O channels, or • 32 TTL I/O plus 16 analog output channels.
22	V213 32 or 64-channel Scanning ADC Features (continued) Differential inputs Programmable gain per channel Dual-ported buffer memory Programmable limit checking and triggering (ADC sampling rate to 20 ksamples/s) 10 Hz to 1 kHz low-pass filter options Precision on-board reference for end-to-end calibration Optional 4 megabyte multibuffer memory
23	V200 16 or 32-channel Sigma-Delta ADC Features 16 or 32 channels of Sigma-Delta ADCs 16-bit resolution at 200,000 samples/s per channel Channel-by-channel programmable gain Synchronization between channels on multiple modules On-board DSP for limit checking Internal/external clock selection Programmable internal clock rate User selection of unified clocking or two independent clock rate groups
24	V200 16 or 32-channel Sigma-Delta ADC Features (continued) A phase-locked-loop multiplier (allowing 1X external clocking) AC/DC coupling Memory options: 8 or 32 Mbyte multibuffer memory Output option: Communication ports for TI TMS320, ‘C40 and ‘C44 DSPs Bridge signal conditioning provided by the V710 active termination panel.
25	V205 32-channel, 10 MSa/s, 16-Bit ADC Features 8, 16 or 32 channels Simultaneous sampling at output rates up to 10 Msamples/s per channel External or programmable internal clock and trigger 2 megasample on-board buffer Multiple board synchronization Continuous and capture modes of data collection Pre- and post-trigger data collection (circular buffering)
26	DACs and Waveform Generators V266 16-bit, 64-channel DAC An economical choice for a multichannel DAC solution V285 16-channel DAC/Waveform Generator Programmable clock rates to 500 kHz
27	V266 16-bit, 64-channel DAC Features Options available for 16, 32 and 64 channels. An economical choice for a multichannel DAC solution. 16-bit resolution. Output full-scale range options: ±10 V, 10 mA maximum. ±16 V, 10 mA maximum. 4–20 mA, 1100 ohms, maximum load. 1 mV total accuracy, voltage options. • Non-isolated outputs. • Update rate, 2 ms; 1 ms for 16 channels.
28	V285 16-channel DAC/Waveform Generator Features Options available for 8 and 16 channels. Full-scale output level: ±10.24 V, 25 mA maximum. Twelve programmable clock rates: 100 Hz to 500 kHz in 1, 2, 5 progression. Programmable Bessel filters on each channel: 10 kHz or 100 kHz selection. 1 or 4 Mbyte memory option for single-shot or continuous mode. Simultaneous update of all channels. Built-in calibration and self test.
29	V387 128-channel Discrete I/O Features Mezzanine card options (mix and match up to four I/O cards options per V387): 32-channel TTL-level, bi-directional I/O. 16-channel isolated input: 5, 12, 24, 48 Vdc, 120 Vac options. 16-channel reed relay output: 0.5 A, 10 VA maximum. 16-channel form “C” relay: 1 A, 50 VA maximum. 16-channel optical isolator: 10 mA maximum. 16-channel solid-state AC switch: 1 A, 200 V peak maximum.
30	V387 128-channel Discrete I/O (continued)
31	Output Controllers V535 8-axis Stepper Motor Indexer Provides full digital acceleration control with output rates to 1,562,500 pulses per second
32	V535 8-axis Stepper Motor Indexer Features Single-width, C size, VXI module Indexer function provided for 4 or 8 stepper motor axes Shaft encoder feedback options available Crystal-controlled programmable pulse rates to 1,562,500 pulses per second Programmable linear acceleration and deceleration rates All timing internally controlled and not dependent on host computer
33	V535 8-axis Stepper Motor Indexer Features (continued) Hard abort activated by limit switches Hard and soft abort activated from software Auxiliary digital input and output channel provided for each motor axis All axes capable of independent setup parameters (velocity, acceleration, etc.) and execution of the motion profiles Multi-axes operation supported
34	V635 8-chan, 100 kHz Frequency Counter Features Provides accurate reading of input signal from 0.06 Hz to 100 kHz without changing ranges “D” and BNC input connector options available Differential and TTL inputs (differential inputs only on BNC option) Programmable observation window: 1 ms to 1.024 s Precision time base: 1 ppm, 10º to 50º C
35	3U Front-end Signal Conditioners SC10, SC11 Power Supplies Provide +5 V and ±15 V for the V710 chassis SC15 Serial Controller Controls and monitors the V710 chassis SC20 Wideband Bridge Signal Conditioner Adds bridge signal conditioning to ADC modules SC21 Bridge Signal Conditioner with Gain and Filtering SC25 Direct-input Module Options with BNC and LEMO for direct input SC30 RMS-to-DC Signal Conditioner V710 Signal Conditioning Chassis
36	SC20/SC21 Wideband Bridge Signal Conditioners Features Two-channel-per-card packaging for maximum versatility Up to 16 SC20/21 Conditioners can be inserted in a V710 Signal Conditioning Chassis Used with the V200 or V213 ADC modules or other ADCs 90 kHz bandwidth when used with a V200 ADC sampling at 200,000 samples/s (SC20 only) Accommodates 1, 2 or 4 active bridge arms
37	SC20/SC21 Features (continued) Programmable shunt calibration Programmable bridge balance Programmable excitation with 0, 2.5, 5 or 10 V selection Excitation regulation and sensing per channel for maximum stability 10-wire transducer hookups can be accommodated Excitation alarm Optional trifilar-wound transformer for excellent high-frequency CMRR Programmable gain from 1 to 1000 (SC21 only) Programmable filtering with 10, 50 and 500 Hz cutoff (SC21 only)
38	SC30 RMS-to-DC Signal Conditioner Features Two-channel-per-card packaging Up to 16 SC30 Conditioners can be inserted in a V710 Signal Conditioning Chassis Provides software-selectable input ranges of 200 mV, 2 V and 20 V Protected up to 300 V common-mode and normal-mode voltage Provides 10 V full-scale DC output Can be used with the V241 high-level mux module Supports software-selected calibration
39	V710 Signal Conditioning Chassis Features Supports up to 32 channels of bridge signal conditioning using the SC20, SC21 or SC30 plug-ins Includes provision for SC10 and SC11 power supplies Channels controlled by straightforward serial protocol using the SC15 serial controller 3U high and arranged for 19” rack mounting
40	V765, V768 and V792 Termination Panels Features V765 Up to 72 terminations with 19” rack mounting Dependable cage-clamp connections to field wiring Improved high-frequency CMMR option available Higher voltage input supported by voltage divider option V792 Similar to V765 with isothermal block and internal temperature reference added for isothermal panel V768 Provides 32 channels of BNC I/O termination
41	KineticSystems Company, LLC 900 N. State Street Lockport, IL 60441