KineticSystems Data Acquisition  
data acquisition products
pxi data acquisition products
vxi data acquisition products
camac data acquisition products

 

 

 

Products

Products > CAMAC > Analog Input > 3563

CAMAC - 3563

16/32-channel Thermocouple Signal Conditioner

View Datasheet
Request
Ordering Information
 
 

ABOUT 3563
The Model 3563 is a single-width CAMAC module providing 16 or 32 channels of general-purpose analog signal monitoring with open circuit detection capability as well as 16 or 32 channels of input multiplexing. It is used with the Model 3518 16-bit Scanning A/D Converter Host module. The 32-channel version does not include inputfilters. The 16-channel version includes a 2-pole, lowpass filter per channel. When enabled from the Dataway, the 3563 switches apositive 10 volts resistance path onto the SOURCE leg of the incoming temperature signal and a negative 10 volts resistance path onto the RETURN leg. Reading the channel's new signal value with the 3518 verifies that thefield wiring is intact and determines its resistance value. Plus and minus 10-volt sources are applied to the field wiring through precision, 100 kilohm resistors (one resistor per leg).

 

Features
  • 16-and 32-channel options (2-pole, lowpass filters on 16-channel option)
  • Channel-by-channel selection of test voltage
  • Test voltage transparent when disabled
  • Multiplexer for use with 3518 ADC
Applications
  • Jet and rocket engine testing
  • Thermocouple monitoring
  • Analog voltage monitoring

 


Return to Product Category

 GaGe | DynamicSignals © DynamicSignals, LLC. 2008 | Site Map