KineticSystems Data Acquisition  
data acquisition products
pxi data acquisition products
vxi data acquisition products
camac data acquisition products

 

 

 

Products

Products > CAMAC > Analog Input > 3564

CAMAC - 3564

4-channel Strain Gage Signal Conditioner

View Datasheet
Request
Ordering Information
 
 

ABOUT 3564
The Model 3564 is a single-width CAMAC module providing four channels of straingage bridge completion and input filtering as well as four channels of input multiplexing. It is used with the Model 3518 Scanning A/D Converter Hostmodule. The 3564 can accommodate transducers that represent one, two, or fouractive arms of a bridge circuit. This input module provides the remaining legs of the bridge (three, two, or none). Bridge completion (for one, two, or fouractive transducer elements) can be selected on a per-channel basis.

Each channel on the 3564 has a precision voltage source for bridge excitation. The excitation sources are strap-selectable for 5 or 10 volts. Calibration resistors are available that can be placed in parallel with one leg of the bridge. The switching of these resistors is programmable on a per-channel basis.

 

Features
  • 4 channels
  • Bridge measurements with one, two, or four active arms
  • Programmable shunt calibration
  • On-board excitation source
  • Two-pole, lowpass filter per channel
  • Multiplexer for use with 3518 ADC
Applications
  • Jet and rocket engine testing
  • General-purpose data acquisition

 


Return to Product Category

 GaGe | DynamicSignals © DynamicSignals, LLC. 2008 | Site Map