KineticSystems Data Acquisition  
data acquisition products
pxi data acquisition products
vxi data acquisition products
camac data acquisition products

 

 

 

Products

Products > CAMAC > Analog Input > 3565

CAMAC - 3565

8-channel RTD Signal Conditioner

View Datasheet
Request
Ordering Information
 
 

ABOUT 3565
The Model 3565 is a single-width CAMAC module providing eight channels of RTD(Resistance Temperature Detector) bridge completion and input filtering as well as input multiplexing. It is used with the Model 3518 Scanning A/D Converter Host module.

The 3565 can accommodate RTD transducers of the two-, three-, or four-wiretype. Each channel of this input module contains the remaining three legs of the bridge for 100 ohm RTDs. If RTDs other than 100 ohms are desired, please contact KineticSystems Corporation for additional bridge resistor options. In addition, each channel can be strap-selected for current excitation of four-wire RTDs with resistance values to 1000 ohms. An excitation source adjustment is provided for each channel. An on-board calibration resistor may be switched in on a channel-by-channel basis by means of a calibration relay register. The calibration relay register can be written and read via the Dataway.

 

Features
  • 8 channels
  • Bridge measurements with two-, three-, or four-wire 100 ohm RTDs
  • Also accommodates current-excited four-wire RTDs
  • On-board excitation source
  • On-board calibration resistor
  • Two-pole, lowpass filter per channel
  • Multiplexer for use with 3518 ADC
Applications
  • Jet and rocket engine testing
  • General-purpose data acquisition

 


Return to Product Category

 GaGe | DynamicSignals © DynamicSignals, LLC. 2008 | Site Map