KineticSystems Data Acquisition  
data acquisition products
pxi data acquisition products
vxi data acquisition products
camac data acquisition products

Products

Products > CAMAC > Analog Input > 3596

CAMAC - 3596

24-bit, 16-channel, Sigma-Delta A/D Converter

View Datasheet
Request
Ordering Information
 
 

ABOUT 3596
The Model 3596 CAMAC module functions as either a single-scan or continuously active 16-channel Sigma-Delta ADC. Sigma-Delta conversion is a technique which attains its very high accuracy by digitally decimating/filtering the output of a fast, single-bit converter. This eliminates the need for expensive tracking filter, sample/hold, and gain functions allowing a simple ADC-per-channel structure. This further eliminates the need to multiplex inputs to a common ADC and thereby reduces crosstalk effects to negligible levels. Another important consequence of the digital filtering is that filter notches are produced whichvan be made to coincide with 60 Hz (or 50 Hz) power line frequencies and their harmonics. Thus, even in environments with severe signal corruption due to power line noise, very good results are possible.

 

Features
  • 16-channels, 24-bit data fields (up to 19 bits single-shot resolution-more withsampling averaging)
  • Automatic tracking filtering (-3dB at 0.262 sample rate)
  • Channel-by-channel programmable pre-gain (1 or 100)
  • Channel-by-channel programmable post-gain (1 through 128)
  • Continuous scan mode at 9.76 Hz to 1.028 kHz sampling rates (per channel)
  • Two calibration modes: internal zero/full-scale references or external(front-panel LEMO) full-scale reference

 


Return to Product Category

Search Site   Go 
 GaGe | DynamicSignals © DynamicSignals, LLC. 2006 | Site Map