KineticSystems Data Acquisition  
data acquisition products
pxi data acquisition products
vxi data acquisition products
camac data acquisition products

Products

Products > CAMAC > Analog Output > 3112

CAMAC - 3112

8-channel, 12-bit D/A Converter

View Datasheet
Request
Ordering Information
 
 

ABOUT 3112
The Model 3112 is a single-width CAMAC module for generating eight output voltages. The standard output is 0 to 10 volts at 5 milliampere maximum. A12-bit register is provided for each channel. Strap options are provided so that the output range of each channel can be changed in the field to 0 to +5volts, +/-10 volts, +/-5 volts, or +/-2.5 volts, independent of the setting of the other channels.

The data is two's complementary and right justified(the LSB is written from Dataway line W1). Settling time of the output to within 1/2 LSB is less than 4 microseconds. The nonlinearity is less than+/-1/2 LSB. The output impedance is less than 100 milliohms. Adjustments are provided for the zero and gain of each channel.

The outputs are referenced to a common ground (the module ground). In critical applications, these signals should be received by differential input circuits.

On power-up, the data registers are cleared.

 

Features
  • 8 independent analog outputs
  • 10 volt output
  • 12-bit resolution for each output
  • 5 milliampere drive capability
  • 4 microsecond settling time
Applications
  • Drive panel meters
  • Drive strip chart recorders
  • Drive x-y recorders
  • Provide set point input to servos
  • Provide input to programmable power supplies

 


Return to Product Category

Search Site   Go 
 GaGe | DynamicSignals © DynamicSignals, LLC. 2006 | Site Map