data acquisition products
pxi data acquisition products
vxi data acquisition products
camac data acquisition products
  GaGe High Speed Digitizers Contact Us | About Us | Site Map  
 

Products

Products > CAMAC > Controllers and Miscellaneous > 3988

CAMAC - 3988

GPIB Crate Controller

View Datasheet
Request
Ordering Information
 
 

ABOUT 3988
The Model 3988 is a double-width CAMAC crate controller that acts as a deviceon the General Purpose Interface Bus (GPIB). This crate controller conforms toall applicable CAMAC specifications as well as those for the GPIB (IEEEStandard 488). The 3988 allows GPIB system controllers to communicate with up to 23 CAMAC I/O modules in a crate.

Two new ordering options are provided. The Model 3988-G3A uses the IEEE-48824-contact ribbon connector, while the 3988-D3A uses the IEC (European) 25-contact "D" connector. These new options support block transfersat data rates up to 600 kilobytes per second with the actual rate limited only by the controller and/or the host computer. The 3988-G3A/D3A supersede the 3988-G3A/D2A and are software-compatible with these earlier lower speed units.

The 3988 functions as a main or auxiliary crate controller. When used as amain crate controller, it can support one or more auxiliary crate controllers. When used as an auxiliary crate controller, the 3988 shares control of the crate with the main crate controller.

 

Features
  • Provides an interface between a GPIB system and a CAMAC crate
  • Supports data transfer rates up to 600 Kilobytes per second
  • Acts as a main or auxiliary crate controller
  • Meets all IEEE-488 requirements
  • Supports Q-Scan, Q-Stop, and Q-Repeat block data transfers
  • Contains a switch-selectable talk/listen address
Applications
  • Laboratory automation
  • Process control
  • CAMAC I/O in a GPIB-controlled system
  • Local GPIB control of a distributed CAMAC system

Return to Product Category

 
   GaGe | DynamicSignals © DynamicSignals LLC 2009