CAMAC - 3610
6-channel, 50 MHz Counter |
 View Datasheet
Request
Ordering Information |
|
| |
ABOUT 3610
The Model 3610 is a single-width CAMAC module containing six independent 24-bit counters. These counters accept either NIM* or TTL input and can count from dc to
50 megahertz. The type of input is user-selectable for each channel. The external inhibit
can be selected to be either NIM or TTL. Each counter has an overflow bit which is set
on a carry from either Bit 16 or Bit 24 and generates a LAM, if enabled. The pattern of
overflow bits in a module can be read. Counters can be inhibited by Dataway Inhibit or
by a front-panel signal. They can be individually cleared by Dataway command or as a
group by Dataway clear or a manual pushbutton. The input is protected for a ±50 volt
transient or ±4 volts dc.
When precise timing of sequenced events is required, the Model 3655 Timing module
provides a time base for the 3610 by asserting the Dataway Inhibit line for a
programmable interval.
|
print this
email this
