KineticSystems Data Acquisition  
data acquisition products
pxi data acquisition products
vxi data acquisition products
camac data acquisition products

Products

Products > CAMAC > Digital Input > 3470

CAMAC - 3470

24-bit Input Register with Strobes

View Datasheet
Request
Ordering Information
 
 

ABOUT 3470
The Model 3470 is a single-width module with a 24-bit register for holding binary input data. The module consists of six 4-bit registers, each having a strobe to allow independent latching of data from various sources. The strobes can be paralleled to allow strobing wider data words from one source. The incoming data is latched two micro seconds after the negative going edge of the strobe, which allows the strobe to be generated simultaneously with the data inthe external device. The Read command causes the entire 24-bit register to be gated onto the Dataway. Internal strobing of the data is allowed on command, and an input gate (continuous load) mode of operation is selectable by a front-panel switch.

 

Features
  • 24-bit data input register
  • Front-panel switch to select external strobe or continuous load mode of operation
  • Six independent 4-bit registers with strobe
  • LAM status bits for interrupt-driven systems
Applications
  • General-purpose data acquisition
  • Several data sources, each connected to one or more strobes
  • Keyboard interface

Return to Product Category

Search Site   Go 
 GaGe | DynamicSignals © DynamicSignals, LLC. 2006 | Site Map