data acquisition products
pxi data acquisition products
vxi data acquisition products
camac data acquisition products
  GaGe High Speed Digitizers Contact Us | About Us | Site Map  
 

Products

Products > CAMAC > Digital Input > 3472

CAMAC - 3472

48-bit Input Gate

View Datasheet
Request
Ordering Information
 
 

ABOUT 3472
The Model 3472 is a single-width input gate for receiving 48 bits of data from external devices. The current state of the input is read by two Read commands. An F(0)• A(0) command reads the state of Group A(24 bits), and an F(0)•A(1) command reads the state of Group B (24 bits).

Two input circuit options are provided. The "Contact" option isintended for monitoring switch contacts and the like. Each bit has an input circuit with an open circuit voltage of 16 volts and a short circuit current of 3.5 milliamperes. The switching threshold is approximately +10 volts. The input is filtered with a one millisecond time constant to reduce noise. A closed external circuit is read as a "1". This provides contact "wetting" current as well as a high noise threshold. On the TTL option, input signals are TTL level with internal 2200 ohm pull-up resistors to +5 volts. The TTL input signals are low-true.

 

Features
  • 48-bit input gate
  • Options available for contact monitoring as well as TTL input levels
Applications
  • General-purpose data input applications
  • Monitoring TTL signals
  • Monitoring contact closures

Return to Product Category

 
   GaGe | DynamicSignals © DynamicSignals LLC 2009