data acquisition products
pxi data acquisition products
vxi data acquisition products
camac data acquisition products
  GaGe High Speed Digitizers Contact Us | About Us | Site Map  
 

Products

Products > CAMAC > Digital Output > 3072

CAMAC - 3072

48-bit Output Register

View Datasheet
Request
Ordering Information
 
 

ABOUT 3072
The Model 3072 is a single-width CAMAC module with 48 output switches. These switches are organized as two 24-bit words. Each switch is an open collector transistor suitable for driving a relay, lamp, solenoid, or similar device.

All of the switches share a common return path. An output switch is closed whenever there is a 1 in the corresponding bit of the data register. Each output can sink 250 mA with a maximum open-circuit voltage of 30 V. Inductive loads should be diode-clamped at the load to remain within the voltage rating. Internal diode suppression clamped to +24 V is available as an option. The 3072 is also available with pull-up resistors for TTL signal levels.

Three connector options are available: a 52-pin, "2D" connector at the rear of the module above the Dataway and either a 50-contact Amphenol ribbon connector or a 50- pin "D" type connector on the front panel.

 

Features
  • 48 output switches
  • 30 V open-circuit rating
  • 250 mA current drive per switch
  • Diode clamping option available
  • TTL output option available
Applications
  • Switch indicator lamps
  • Switch relays
  • Switch solenoids
  • Control valves
  • Output data

Return to Product Category

 
   GaGe | DynamicSignals © DynamicSignals LLC 2009