Products

Portable Systems - DAQ532 32-channel, 16-bit ADC, Signal Conditioning System View Datasheet Request Ordering Information   ABOUT DAQ532 The DAQ532 is a 32-channel multiplexed signal conditioning system with a 16-bit resolution ADC and 10 BaseT Ethernet connectivity to a PC or laptop for setup, data display and processing. The ultra-compact 57.5mm (2.26") high, 112mm (4.41") wide, 220 mm (8.66") deep fully enclosed chassis weigh just 1.09kg (2.4lbs), making them suitable for in-vehicle applications. The DAQ532 chassis can be powered from DC voltage sources ranging from 10-18 volts. Power consumption is 10 watts for typical configurations, 30 watts maximum. Local data storage is available via a CompactFlashT module. Auto configuration on power-up provides stand-alone capability and along with the simple user interface makes data collection and storage a two-mouse click process. The signal conditioning consists of 32 multiplexed differential input analog channels that can be configured with fixed 2-pole filters and fixed gains of 1/3 to 100. Filter options are available in a 1,2,5 progression from 10Hz to 1kHz. Filters and gain are configured in 8-channel groups. Input voltage ranges up to ±30 volts are supported. Channel inputs have over-voltage protection of ±35 volts. End-to-end channel calibration is accomplished by configuring the input multiplexers via software to receive a reference voltage provided by an internal calibrator. Two channels of Frequency Measurement are provided. These channels can alternately be configured as counter inputs. External trigger input is provided as well. The internal sample clock can be programmed via software for sample rates from 0.0625Hz to 50kHz.

Features 32 differential input analog channels with signal conditioning 2 Additional Frequency Measurement channels 10 BaseT Ethernet connectivity to your PC or laptop for setup, data display and processing Wireless Ethernet available 16-bit analog-to-digital converter resolution Aggregate sampling rate of up to 32k samples/second (1k sample/channel/second with all channels active) via Ethernet, up to 50k samples/second to CompactFlash™ Simple user interface allows for quick setup for data collection and storage Local data storage via CompactFlashT module Auto-configuration on power-up for stand-alone applications External trigger input is provided Applications In-vehicle testing Tests using low-level sensors (thermocouples, etc.) Tests using high-level sensors (battery voltage, steering/throttle position, shock travel, etc.)   -- Jump to Data Acquisition Product -- Counters and Pulse Output Modules Relay Multiplexer Mainframe/Chassis Analog and Digital I/O Analog I/O and Signal Conditioners Counters and Pulse Output Modules Digital Input and Output Memory, Controllers, DSPs & Mainframes Modules for the V710 Termination Panel Signal Conditioner Chassis Special Functions Termination Assemblies and Panels VME to VXI Carrier/Adapter Card VXI Software Applications, Drivers, etc. Grand Interconnect Analog Input Analog Output Cables and Connectors CAMAC Equipment Controllers & Misc. Counters, Timer and Clock Module Digital Input Digital Output Display Memory Modules Process Interface Special Function Modules Software Drivers Transient Recorder Modules Instrumentation Recorders Signal Conditioning Systems Data Loggers/Recorders Temperature Loggers Cyber Systems Data Acquistions Systems Preston Scientific Analog & Digital Systems Return to Product Category