KineticSystems Data Acquisition  
data acquisition products
pxi data acquisition products
vxi data acquisition products
camac data acquisition products

 

 

 

Products

Products > VXI > Analog I/O and Signal Conditioning > V200

VXIBus - V200

16/32-channel, 16-bit, 200,000 Sample/s/channel Sigma-Delta ADC

View Datasheet
Request
Ordering Information
VXI product V200
 

ABOUT V200
The V200 is a single-width, C-size, register-based, VXIbus module that provides 16 or 32-channels of 16-bit resolution analog-to-digital conversion at sample rates up to 200 ksamples/s per channel. The sigma-delta architecture provides inherent filtering and synchronous sampling without the need for sample/hold amplifiers or sophisticated analog filters. A simple, 3-pole pre-filter assures no frequency aliasing. The module is divided into two channel groups, allowing one half of the channels to be operated at one clock rate, while the other half are operated at another clock rate. The groups can also be combined, operating the entire module at one clock rate.

Each channel has independently programmable input spans from +/-10 mV to +/-10 V provided by an Instrumentation amplifier front end. AC/DC coupling can also be programmed on a channel-by-channel basis. Channel calibration and self-test are performed automatically on command by the embedded DSPs. These DSPs also allow programmable level and slope limit checking.

 

Features
  • 16 or 32 channels of Sigma-Delta ADCs
  • 16-bit resolution at 200,000 samples/s per channel
  • Channel-by-channel programmable gain
  • Synchronization between channels on multiple modules
  • On-board DSP for limit checking
  • Internal/external clock selection
  • Programmable internal clock rate
  • User selection of unified clocking or 2 independent clock rate groups
  • A phase-locked-loop multiplier (allowing 1X external clocking)
  • AC/DC coupling
  • Memory options: 8 or 32 Mbyte multibuffer memory
  • Output option: Communication ports for TI TMS320, 'C40 and 'C44 DSPs
  • Bridge signal conditioning provided by the V710 active termination panel.

Return to Product Category

 GaGe | DynamicSignals © DynamicSignals, LLC. 2008 | Site Map