KineticSystems Data Acquisition  
data acquisition products
pxi data acquisition products
vxi data acquisition products
camac data acquisition products

 

 

 

Products

Products > VXI > Analog I/O and Signal Conditioning > V216

VXIBus - V216

16-channel, 24-bit Sigma-Delta ADC

View Datasheet
Request
Ordering Information
 
 

ABOUT V216
The Model V216 is a single-width, C-size, register-based, VXIbus module that functions as either a single-scan or continuously active 16-channel Sigma-Delta ADC. Sigma-Delta conversion is a technique which attains its very high accuracy by digitally decimating and filtering the output of a fast, single-bit converter. This eliminates the need for expensive tracking filter, sample/hold, and gain functions allowing a simple ADC-per-channel structure.

This further eliminates the need to multiplex inputs to a common ADC and thereby reduces crosstalk effects to negligible levels. Another important consequence of the digital filtering is that filter notches are produced which can be made to coincide with 60 Hz (or 50 Hz) power line frequencies and their harmonics. Thus, even in environments with severe signal corruption due to power line noise, very good results are possible.

 

Features
  • 16-channels, 24-bit data fields (up to 19 bits single-shot resolution-more with sample averaging)
  • Automatic tracking filtering (-3 dB at 0.262 x sample rate)
  • Channel-by-channel programmable pre-gain (1 or 100)
  • Channel-by-channel programmable post-gain (1 through 128)
  • Continuous scan mode at 9.76 Hz to 1.028 kHz sampling rates (per channel)
  • Single-scan mode through synchronizing front-panel trigger (in and out) or VXI command
  • Two calibration modes-internal zero/full-scale references or external (front-panel LEMO) full-scale reference

Return to Product Category

 GaGe | DynamicSignals © DynamicSignals, LLC. 2008 | Site Map