V208
VXI 16-Bit ADC Host Subsystem Module

The V208 is a single-width, C-size, register-based, VXIbus module that provides high-speed, high-resolution, analog-to-digital conversion. This ADC host module is intended for use with the KineticSystems line of VXIbus signal conditioning modules that incorporate the analog MUX-bus (Models V243 & V246), allowing extremely flexible system configurations without the need for intermodule cabling.

The V208 host ADC module can be mixed and matched with up to 11 signal conditioning modules to support a wide range of analog channels. Signal conditioning modules communicate with a host ADC module via the Local Bus on the VXI backplane, using a protocol developed by KineticSystems called MUX-bus.

VXI 16-Bit ADC Host Subsystem Module: V208

V208 Data Sheet

Supporting Software

Supporting Chassis

US Prices Start at: $(Consult)

Request Quote

The V208 provides four instrumentation amplifier inputs, allowing high data throughput even with a large number of input channels. Using the appropriate signal conditioning modules, up to 2,048 channels can be converted with each channel having its own limit-checking value. Up to 4 preconditioned signals can be monitored by the V208 without any signal conditioning modules.

This product provides a high degree of flexibility in configuring an analog sampling system. With the multibuffer memory, data can be taken at high sample rates with conventional controllers. If the Digi-bus option is used, the converted data can be forwarded to other modules supporting this protocol.

The V208 supports both static and dynamic configuration. It may be accessed using A32/A16, D32/D16 data transfers.

VXI Module Features

  • ADC Supports 2,048 MUX-Bus Channels of Signal Conditioning
  • 100 or 200 KSPS Aggregate Sample Rates
  • 16-Bit Resolution & Differential Inputs
  • Optional Digi-Bus
  • Requires no Intermodule Cabling
  • Programmable Sampling & Triggering with Separate
    Limit Check on Each Channel
  • Precision On-Board Reference for End-to-End Calibration
  • Optional 4 or 16 MB Memory
  • Use with Signal Conditioning Modules:
    • V243: 48 or 96 Differential Input Channels
    • V246: 8 Bridge Channels

VXI Module Ordering Information

V208 Products and Part Numbers
16-bit, 100 KSPS Aggregate ADC Subsystem V208-YA12
16-bit, 100 KSPS Aggregate ADC Subsystem,
4 MB Multibuffer Memory with Pre-Trigger
V208-YD22
16-bit, 100 KSPS Aggregate ADC Subsystem,
16 MB Multibuffer Memory with Pre-Trigger
V208-YD32
16-bit, 200 KSPS Aggregate ADC Subsystem V208-ZA12
16-bit, 200 KSPS Aggregate ADC Subsystem,
4 MB Multibuffer Memory with Pre-Trigger
V208-ZD22
16-bit, 200 KSPS Aggregate ADC Subsystem,
16 MB Multibuffer Memory with Pre-Trigger
V208-ZD32
16-bit, 200 KSPS Aggregate ADC Subsystem,
4 MB Transfer Memory
V208-PD22