CAMAC 24-Bit Discrete Output Module

* This legacy model is discontinued. We can no longer provide any CAMAC based products.
We encourage our customers to review our current cPCI/PXI Product line for possible future migration:

cPCI/PXI Data Acquisition & Control Products

The 3095 is a single-width CAMAC module that provides an interface between the CAMAC Dataway and discrete outputs, allowing the computer to control lights, buzzers, and other on/off devices.

The 3095 module contains 24 output channels and contains Rank1/Rank2 registers for the simultaneous update of outputs on more than one module for simulation-type systems.

All outputs are brought to the front panel via either a 50-pin "D" socket connector or a 50-contact ribbon connector.

CAMAC 24-Bit Discrete Output Module: 3095

3095 Data Sheet

Supporting Chassis

US Prices Start at: $(Consult)

Request Quote

The data word is written into the Rank 1 registers via an F(16)•A(0) command. The external control of the Rank 2 register (and output devices) is selected by the Mode register. The Rank 1 data is copied to the Rank 1 register by using a one microsecond external convert pulse on either the P1 or P2 Dataway line or by the F(25) A(0) command, regardless of the mode setting.

CAMAC Module Features

  • 24-Bits of Discrete Output
  • Relay Output, Optical Isolator Output, &
    Open Collector Output Options
  • Rank 1/Rank 2 Registers for Simultaneous Update of Outputs
    on More than 1 Module

CAMAC Module Ordering Information

3095 Products and Part Numbers
24-Bit Discrete Output, Relay Contacts
50S Amphenol Ribbon Connector
24-Bit Discrete Output, Optical Isolators
50S Amphenol Ribbon Connector
24-Bit Discrete Output, Open Collectors
50S Amphenol Ribbon Connector
24-Bit Discrete Output, Relay Contacts
50P "D" Connector
24-Bit Discrete Output, Optical Isolators
50P "D" Connector
24-Bit Discrete Output, Open Collectors
50P "D" Connector